Shenzhen Ok Smart-Lcm Photoelectric Co., Ltd.
customer first ！quality first ！
Add to Cart
FUNCTIONS & FEATURES :
Format : 130X64 Dots .
LCD mode : STN/Y-G, Positive, Transmissive .
Viewing direction : 6 o’clock .
Driving scheme : 1/65 Duty cycle, 1/9 Bias .
Low power operation : Power supply voltage range (VDD): 3.0V .
VLCD adjustable for best contrast : LCD driving voltage (VOP): 10.0V .
Operating temperature : 0℃~50℃ 2-8.
Storage temperature : -10℃~60℃
MECHANICALSPECIFICATIONS :
Module size : 87mm(L)*44.5mm(W)*2.8mm(H) .
Viewing area : 83mm(L)*34.5mm(W) .
Dot pitch : 0.6mm(L)*0.49mm(W) .
Dot size : 0.55mm(L)*0.4mm(W)
How to order lcd?
A:Please send us your purchase order by Email or Fax or by Escrow, or ask us to send you one invoice. We need to know the following information for your order.
1)Product information-Quantity,part number
2)Delivery time required.
3)Shipping information-Company name, Street address,Phone&Fax number,Destination sea port.
4)Forwarder's contact details if you have any in China.
Contact us:
For more details,pls feel free to contact us at anytime.
24 hours hot-line tel & We-chat :0086 133 1681 5589 or ok03 AT smart-lcm dot com
Joanna Lee will be happy to serve you.
| Pin no | Symbol | Function |
| 1 | /CS1 | This is the chip select signal. When /CS1 = “L”, the chip select becomes active, and data/command I/O is enabled |
| 2 | /RES | When /RES is set to “L”, the settings are initialized |
| 3 | A0 | Select register data when A0= “H”, and instruction when A0= “L” |
| 4 | /WR | In 6800 mode, it’s Read/Write control pin. In 8080 mode, when /WR=0, write is active. |
| 5 | /RD | In 6800 mode, it’s enable control pin. In 8080 mode, when /RD=0, read is active |
| 6~13 | D0~D7 | 8bit Bi-directional data bus. |
| 14 | VDD | Supply voltage for logic circuit +3.3V |
| 15 | VSS | Ground |
| 16~21 | VOUT,C3+, C1-, C1+, C2+, C2 | DC/DC voltage converter. |
| 22~26 | V1,V2,V3,V4,V0 | Driving supply voltage. V0≥V1≥V2≥V3≥V4≥VSS |
| 27 | VR | Output voltage regulator terminal. |
| 18 | C86 | C86=”H”:6800 Series MPU interface. C86=”L”: 8080 Series MPU interface. |
| 19 | P/S | P/S=”H”: Parallel data input/output. P/S=”L”: Serial data input. |
| 30 | ORS | IRS=”H”: Use the internal resistors. IRS=”L”: Do not use the internal resistors. |
